Bend 90°, extended

An effective tubing system has to meet certain requirements. Constant transport velocity in the tubing at different loads is one require­ment. Correct transport velocity is another. When the velocity is too low, the material will cause a blockage. When the velocity is to high, this will lead to unnecessary wear and loss of energy. Dustcontrol's competent staff can dimension a system to your needs.  

When transporting material in a tubing system turbulent flow will cause noise. Material particles impact the hard tubing walls. Using an elastomer (EPDM- and NBR-rubber) in bends, branch pipes and mounting brackets moderates the sound considerably.  

Bends and branch pipes are designed to withstand high negative pressure. The bends are designed with a radial ridge to spread the impact area of the mateial thereby reducing wear and minimizing the risk of blockage.  

Every elastomer bend and branch pipe are designed with a plugged hole, that can be used for measuring and inspection. The advantages with the elastomer tubing system are:

• Low noise
• Blockage risk reduced
• Reduced wear

The measurements are in millimeter if nothing else is given.

For other dimensions, please contact Dustcontrol.

¹Carbon Steel Zink Coated, 1311.
²Stainless steel SS2333/Grade 1.4301/DIN X 5 CrNi 1810/UNSS30400/AFNOR Z 6 CN 18.09/ANSI 304/BS 304S15.
³Rubber, EPDM.
⁴Rubber, NBR. 
⁵Reinforced Spiral Tubing.
⁶Only for restricted spaces